Display Backlight; Recall Of Stored Data; General Notes; Replacement Of Batteries - Tintometer Lovibond MD200 Mode D'emploi

Functional description – General notes
GB
!
!

Replacement of batteries:

(F) instrument back
CAUTION:
To ensure that the instrument is water proof:
• seal ring (E) must be in position
battery compartment cover (B) must be fixed with the four screws
•
If the batteries are removed for more than one minute the date and time menu starts auto-
matically when the photometer is switched on the next time.
18

Display backlight

Press the [ !] key to turn the display backlight on or off. The backlight
is switched off automatically during the measurement.

Recall of stored data

If the instrument is switched on, press the [!] key for more than 4 se-
conds, then release the [!] key to access the recall menu.
(D) batteries
(C) notch for IR
data transfer
(B) battery compart-
ment cover
(E) seal ring
(A) screw
MD200_8c 12/2020