Getting Started - Sony WEGA Trinitron KV-LS212 Mode D'emploi

x Getting Started
Select Confirm
4 GB
Step 1
Insert the batteries (supplied) into the remote.
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
• Your TV can receive both TV and FM radio signals from
the appropriate connections through the 8 (antenna
input) terminal (see page 6).
• You can also connect your TV to other optional
components (see page 6).
Step 3
Plug in the power cord, then press 1 on the TV to turn
it on.
• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Step 4
Set up the TV by following the instructions of the
"Initial Setup" menu (see page 5).
End