Transportation And Storage; Reciclying And Disposing; Guarantee - Greencut JET-2800SX Manuel D'utilisation

TRANSPORTATION AND STORAGE

• Before transporting and/or storing the pressure washer, make sure that it is completely cooled down.
• Transport the machine with the fuel switch off and keep it upright to prevent fuel spills.
• Store this tool in a clean, dry place and out of the reach of children.
• For long-term storage, the fuel tank should be as empty as possible.
• Remove the spark plug and apply 30ml. of clean engine oil in the cylinder. Pull the starter rope slowly to distribute
the oil. Replace the spark plug.
• Cover the machine to protect it
• The machine is not weatherproof and should not be stored in direct sunlight, at high ambient temperatures or
in wet or very damp places.

RECICLYING AND DISPOSING

Worn products are potentially recyclable and should not be disposed of in the usual waste. Help us to protect the
environment and preserve natural resources.
Dispose of the device in an environmentally friendly manner. Do not dispose of it with household waste. Its plastic and
metal components can be separated and recycled. Take this appliance to an approved recycling centre (green point).
Gasoline, used oils, oil/gasoline blends and objects stained with gasoline (e.g., rags) should not be disposed of in
regular trash, sewage, dirt, rivers, lakes or the sea. Oil-stained items should be disposed of in accordance with local
regulations: take them to a recycling center.
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.

GUARANTEE

GREENCUT guarantees all GREENCUT products for a period of 24 months (valid for Europe). The warranty is subject
to the date of purchase taking into account the intended use of the product.
As a condition subject to warranty, the original receipt must be presented indicating the date of purchase and its
description as well as the defective tool.
The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources,
fan and transmission belts, impellers, air filters, spark plugs and damage caused by improper use, especially non-
compliance with operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or other than with original GREENCUT
spare parts, the warranty will be voided.
In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free
of charge. Other claims beyond this warranty are not valid.
85
EN