Greencut JET-2800SX Manuel D'utilisation page 68

68
WORK AREA SAFETY
• Work areas should be clean and well lit.
• Keep out curious people, children or animals while operating this machine.
• Never point the pressure jet at people, animals, cars, windows, windows or other items. Nor to public roads or
areas where people, animals and/or vehicles may be passing through.
• Exhaust gases, fuel vapors and oil contain carbon monoxide and hazardous chemicals.
• Do not use this machine on unstable roofs or surfaces.
• Keep the work area clean and work only with sufficient lighting.
• Remember that the machine operator is responsible for hazards and accidents caused to other people or things.
The manufacturer is in no way liable for damage caused by improper or incorrect use of this machine.
FUEL SAFETY
• Gasoline and oil are dangerous. Do not inhale or ingest. If you swallow fuel and/or oil, seek medical advice
promptly. If it comes into contact with fuel or oil, clean with plenty of soap and water as soon as possible. If
irritated eyes or skin occur afterward, consult a doctor immediately.
• Fuel and oil are dangerous and highly flammable chemicals. If they become inflamed, extinguish the fire with a
dry powder extinguisher.
• Do not spill fuel or smoke near the machine.
• Always turn off the engine before refuelling.
• Always refuel in well-ventilated areas. And never with the engine running, or hot.
• If a fuel leak is found, do not start or run the engine until the leak has been repaired.
• Make sure the fuel cap is properly closed.
• Fuel stored in the carburetor for long periods of time can cause a hard start and may also lead to further repairs
and maintenance.
• Always store fuel in approved containers.
MACHINE MAINTENANCE, TRANSPORTATION AND STORAGE
• Make sure you connect the machine to a water source that has flow at the machine's expense.
• Ensure that the water source to which this machine connects is clean and free of impurities.
• Carry out regular maintenance on the machine. We recommend that maintenance and repairs not described in
this manual be performed by an Technical Service.
• Spare parts must be original from the manufacturer GREENCUT to help ensure the safety of the equipment.
• Keep the handles of the machine dry and clean.
• Always turn off the machine motor before changing accessories or storing the machine.
• Keep the machine and hoses in good working condition.
• Operate the equipment only on solid, level surfaces. Do not hold or suspend equipment from hoses or other
unstable means.
• Keep this machine out of the reach of children.
SERVICE
• Have your machine checked periodically by a qualified technician using only original spare parts. Should you have
any queries, please contact Official Technical Service.