Hitachi CPX7 Manuel D'utilisation page 88

RS-232C Communication
RS-232C Communication
When the projector connects to the computer by RS-232C communication, the
projector can be controlled with RS-232C commands from the computer.
For details of RS-232C commands, refer to RS-232C Communication command
table (
10).
Connection
Turn off the projector and the computer.
1.
Connect the projector's CONTROL port and the computer's RS-232C port
2.
with a RS-232C cable (cross). Use the cable that fulfi lls the specifi cation
shown in fi gure.
Turn the computer on, and after the computer has started up turn the projector
3.
on.
8
RS-232C
RS-232C Cable
RS-232C port
of the computer
7 6
9 8
5 4 3 1
2
CD (1)
RD(2)
TD (3)
DTR (4)
GND (5)
DSR (6)
RTS (7)
DTS (8)
RI (9)
CONTROL
(cross)
CONTROL port
of the projector
9 8 7
5 4 3 2 1
(1) −
(2) RD
(3) TD
(4) −
(5) GND
(6) −
(7) RTS
(8) CTS
(9) −
6