Publicité
Listening To the Radio
1. Press TUNER (a).
2. Press BAND (b) several times to select either AM
a
or FM.
3. Press and hold TUNING i or TUNING j (c) for
about a second to start automatic tuning to a radio
station. Tuning stops when one is found.
You can preset up to 30 stations.
b
1. Tune into the AM/FM radio station you want to
register.
2. Press EDIT (d) so that the preset number on the
c
display flashes.
3. Press PRESET i or PRESET j (e) to select a
number between 1 and 30 while the preset number
is flashing.
4. Press ENTER (f) to confirm.
0 To select a preset radio station, press TUNER
d
e
f
14
(a) then press PRESET i or PRESET j (e).
About Listening Modes
The default setting is for the All Ch Stereo mode to be
selected which plays a stereo image from the front
a
and rear, irrespective of the input audio format.
SURR button (a)
You can select the Dolby Digital and DTS listening
modes. When the input signal is multi-channel, the
listening mode switches to Dolby Digital or DTS-HD
d
MasterAudio, for example, to suit the input audio
c
format. When the input signal is 2-channel, you can
select the DOLBY PLII MOVIE/MUSIC/GAME and
b
NEO:6 CINEMA/MUSIC listening modes which
expand playback to 5.1 channels.
DIRECT button (b)
You can select the DIRECT mode that shuts down
circuits and processing that affect sound quality, such
as the tone control circuits. In this case, speakers
play the sound field according to the number of
channels in the input signal, so there would be output
from only the front speakers for a 2-channel signal,
for example.
e
STEREO button (c)
You can select the STEREO mode to playback only
from the front speakers and subwoofer.
DSP button (d)
You can select original surround modes such as the
All Ch Stereo and TV Logic modes.
Publicité
