Troubleshooting - Ryobi RB101 Manuel D'utilisation

Problem
Wax does not go on evenly.
Polishing seems difficult.
Polisher does not turn on.
Pad spins slower than normal or not
at all.
NOTE: ILLUSTRATIONS START ON PAGE 11
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

TROUBLESHOOTING

Possible Cause
Too much wax on the bonnet.
Bonnet may be worn.
Bad connection to receptacle.
Problem with motor.
Motor needs to be serviced or replaced.
This product has a Three-year Limited Warranty.
For Warranty details go to www.ryobitools.com
10 — English
Solution
Remove a portion of the wax and retry.
Replace bonnet.
Check to make sure plug is properly
seated in outlet. If using an exten-
sion cord, check connection and wire
gauge.
Call authorized service center.
Call authorized service center.