Troubleshooting - Ryobi RB101 Manuel D'utilisation

Problem
Wax does not go on evenly.
Polishing seems difficult.
Polisher does not turn on.
Pad spins slower than normal or not
at all.

TROUBLESHOOTING

Possible Cause
Too much wax on the bonnet.
Bonnet may be worn.
Bad connection to receptacle.
Problem with motor.
Motor needs to be serviced or replaced.
12 — English
Solution
Remove a portion of the wax and retry.
Replace bonnet.
Check to make sure plug is properly
seated in outlet. If using an exten-
sion cord, check connection and wire
gauge.
Call authorized service center.
Call authorized service center.