Qlima Fiorina 74-2 S-line Manuel D'installation page 96

1. INTRODUCTION
2. SAFETY INSTRUCTIONS
3. ASSEMBLY INSTRUCTIONS FOR THE PARTS SUPPLIED
3.1 Assembling the display (if not pre-installed)
3.2 Position the room temperature sensor
4. MINIMUM REQUIREMENTS FOR THE FLUE PIPE/CHIMNEY
4.1 Minimum requirements that the chimney must meet
5. CONNECTION POINT BETWEEN THE CHIMNEY AND STOVE
6. CONNECTION OF THE COMBUSTION AIR PIPE
7. COMPULSORY ROOM VENTILATION WHEN USING THE STOVE
8. POSITION THE UNIT
9. ELECTRICAL CONNECTIONS
9.1. Wiring diagram
10. INITIAL START-UP
11. PRODUCT SHEET
G
4
96
All the images referred to in this manual can be found at the bottom of
the manual.