EQUATION CUBE Manuel D'installation, D'utilisation Et D'entretien page 107

EXAMPLE OF THE FRESH AIR INTAKE CONNECTION FOR THE COMBUSTION
With the goal of guaranteeing a proper functioning of the stove, it is possible to connect the intake air pipe directly to the
external area, using a steel tube with Ø40mm diameter section, and equipped with silicone joints. A 90º angle pipe from the
base will guarantee the air for the combustion making sure that there is not any obstruction.
Ecomasa World Investments reject any responsibilities for malfunctioning of the stove in the case of
not following the installation manual. All related damages will not be covered by the guarantee.
3.4 SMOKE EVACUATION SYSTEM
It is important to remember that the smoke evacuation system is essential for the operation and safety of the product.
The installation must be done by qualified personnel and with respect for the rules and regulation of the sector (UNI EN1443
and UNI EN10683)
In order to acquire knowledge, information or verify the installation of the smoke evacuator system, we recommend you to
contact with the National Association of specialists for the installation of this type of products as they will have detailed
knowledge of the rules and all the technical and legal details.
Specialized technicians must put attention to this table:
Stove model
Minimum length of pipe
CO measured with 13% of oxygen
Average temperature of evacuation gas
EXAMPLE
Tee duct with inspection door
Lado cerrado
Tee duct 90º with inspection door
Pa
ppm
°C
157 mm
56 mm
14 mm
4 mm
105
CUBE
12
140
195