Akai Professional MPC LIVE II Guide D'utilisation Rapide page 5

19. Mute / Sample Edit: Press this button to view the last used Mute Mode, either Track Mute
(default) or Pad Mute. In Track Mute Mode, you can mute tracks within a sequence or set mute
groups for each track. In Pad Mute Mode, you can mute pads within a program or set mute
groups for each pad within a program. Pressing the button multiple times will toggle between the
two Mute Modes.
Press and hold Shift and then press this button to enter Sample Edit Mode where you can edit
your samples using various functions and processes.
20. Next Seq / XYFX: Press this button to view Next Sequence Mode where you can trigger different
sequences simply by playing the pads. This is useful for live performances, letting you change a
song's structure in real time.
Press and hold Shift and press this button to view XYFX Mode, which turns the touchscreen into
an XY pad where each axis represents the range of an effect parameter. As you move touch or
move your finger on the touchscreen, the current position will determine the current value of the
two parameters. You can use this mode to create interesting effect automation on your tracks.
21. –/+: Press these buttons to decrease/increase the value of the selected field in the display.
22. Tap Tempo / Master: Press this button in time with the desired tempo to enter a new tempo (in
BPM).
Press and hold Shift and press this button to set whether the currently selected sequence
follows its own tempo (the button will be lit amber) or a master tempo (the button will be lit red).
23. Rec: Press this button to record-arm the sequence. Press Play or Play Start to start recording.
Recording in this way (as opposed to using Overdub) erases the events of the current sequence.
After the sequence plays through once while recording, Overdub will be enabled.
24. Overdub: Press this button to enable Overdub. When enabled, you can record events in a
Sequence without overwriting any previously recorded events. You can enable Overdub before
or during recording.
25. Stop: Press this button to stop playback. You can double-press this button to silence audio that
is still sounding once a note stops playing. Press and hold Shift and press this button to stop
playback and return the playhead to 1:1:0.
26. Play: Press this button to play the sequence from the playhead's current position.
27. Play Start: Press this button to play the sequence from its start point.
28. Master Vol: Turn this knob to adjust the volume of the outputs, phones output and speakers.
29. Speakers: When the Speaker switch on the rear panel is set to On, these speakers will play the
current audio. Use the Master Volume knob to control the volume of the speakers.
Rear Panel
14 14 14
15 16
1. Power Input: Use the included power adapter to connect MPC Live II to a power outlet.
2. Power Adapter Restraint: Secure the power adapter cable to this restraint to prevent it from
accidentally unplugging.
3. Power Switch: Turns MPC Live II's power on/off.
4. Charging Indicator: This light (behind the vent) will turn on when MPC Live II's internal battery is
charging (when the power input is connected to a power outlet). When the battery is fully
charged or when it is disconnected from a power outlet, then this light will turn off.
8
13
10
11
17
9
12
2 5
6 1
7
4
3
5