Programming Tracks; For A Cd; For Wma/Mp3 Files; Erasing The Program - Pioneer X-EM21 Mode D'emploi

Playing

Programming tracks

Note
• You can program up to 20 tracks.
• During programming, if no operation is made within 20
seconds, the system returns to the stop mode without
saving earlier operations.

For a CD

Press  to stop playback.
1
[T0], the total number of tracks, and the duration time are
displayed.
2 Press PROGRAM to activate the
programming.
[PROG.] and [P01] (the sequence number) are displayed with
[00] blinking.
Press / to select a track.
3
The track number blinks.
4 Press PROGRAM again to program the
selected track.
5 Repeat steps 3 and 4 to program more
tracks.
Press  to start playback.
6

For WMA/MP3 files

Press  to stop playback.
1
[A XXX] (XXX indicates the total number of albums) and
[T XXX] (XXX indicates the total number of tracks) are
displayed.
2 Press PROGRAM to activate the
programming.
[PROG.] and [P01] are displayed with [A00] blinking.
Press / repeatedly to select an album.
3
[A XX] (XX indicates the album number) blinks.
4 Press PROGRAM again to confirm the
selected album.
[T00] blinks.
Press / repeatedly to select a track.
5
[T XX] (XX indicates the track number) blinks.
6 Press PROGRAM again to confirm the
selected track.
7 Repeat steps 3 to 6 to program more tracks.
Press  to start playback.
8

Erasing the program


To erase the program,
• Switch to another source.
05
15
En