Reliable EnviroMate PRONTO P7 Guide D'utilisation page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ACCESSORIES
TAPER NOzzLE (11)
Insert the taper nozzle (11) in the accessory base (3) by lining up the lugs on
the taper nozzle with the holes in the base (3) and turn it clockwise (Fig. 3).
NYLON BRUSH (8,9), BRASS BRUSH (7) AND ANGLE NOzzLE (10)
Attach these accessories by pushing them as far as they will go onto the
taper nozzle (11), taper nozzle with handle (12) or flexible pipe (16).
For items that are particularly prone to scratches, it is best to use the
nozzle without a brush. For all other areas, start with the nylon brush (least
abrasive) and carefully work your way up to the brass. It is always better to
use care when using the brushes to prevent damage or scratching.
The use of the steam nozzle alone is particularly good for cleaning and
degreasing many working surfaces, ventilation hoods, see through oven
doors, ventilation grating, kitchen furniture, stainless steel or enamel sinks,
hand-basins, bath-tubs, water taps (to remove scale and water residue),
doors, metal frames, car wheel rims, pet areas etc.
The nylon brush, because of its softness, is ideal for removing the dirt in
grout, sinks and other surfaces where you need some light scrubbing action.
Be careful not to scratch the surface.
Tougher cleaning jobs may require the use of the brass brush that is supplied.
Please make sure you are careful that it does not scratch the surface with this
tool. Brass is tougher than nylon, but softer than stainless steel. For surfaces
(grout for example) where the dirt is not being properly lifted with the nylon
brush, carefully using the brass brush may give the best results.
When using the steam nozzle with or without the brushes, you will need a
cloth to wipe up the moisture and dirt that has been lifted through cleaning.
fLExIBLE PIPE (16)
If you want to reach hard to access places or the area to be cleaned is too
far away, use the flexible hose.
Attach the pipe to the appliance in the way explained for attaching the
taper nozzle (11).
You can add the following accessories to the flexible pipe, on its flat side:
nylon and brass brushes (7,8,9), angle nozzle (10), taper nozzle (11),
taper nozzle with handle (12) fabric accessory (13), and window-cleaning
accessory (15).
07

Publicité

Table des Matières
loading

Table des Matières