Table des Matières
Publicité
Motor adjustment
... and it is
as simple as this:
1
2
3
4
5
Light On/Off
To really enjoy taking a shower
with the new Duschpaneel, you
just have to „tell" the system
about its environment. This is
done with the so-called „mo-
tor adjustment" by just
pressing a button.
What happens now is that the
new Duschpaneel adapts to the
individual "home situation".
The Duschpaneel must be in
„stand-by" status (the display
has background lighting, no
functions are active). The hand
shower is automatically acti-
vated during motor adjustment
Now press the >42° (1)
button as well as the Body
shower button until the letters
TCH (2) are displayed.
Now press the MODE button
(3): Motor adjustment now
runs automatically.
The letter C (3) is displayed
after the motor adjustment.
Store the motor adjustment with
the MODE button.
Shower lighting can be oper-
ated independent from the
showers with the Shower
lighting on/off button.
Operation
This depends on the type of
heating and the available
water temperature.
(Attention: These specifica-
tions can change later when a
heating system is installed or
modified, or the water tempera-
ture is changed)
(water emerges) – therefore
check the position and setting
of the hand shower.
Pressing the >42° button stops
the motor adjustment prema-
turely (the curve valid last (fac-
tory setting) is then applicable).
It is automatically switched off
after the shower.
Factory setting: 2 minutes;
individually adjustable (1 – 50
min., refer to Page 34).
31
Publicité
Table des Matières
