Videotec SM84A Manuel D'instructions page 67

[ID TEXTS
[----------------------------]
[Cam Text
[
[>1 Text O1
[ 2 Text O2
[ 3 Text O3
[ 4 Text O4
[ 5 Text O5
[
[INC.Previous DEC.Next
[ENTER.Modify SEQ.End
[CAMERA TEXT 1
[----------------------------]
[Text O1#
[----------------------------]
[1.ABC 2.DEF 3.GHI
[4.JKL 5.MNO 6.PQRS
[7.TUV 8.WXYZ
[
[ENTER.Blank CLEAR.Erase
[INC/DEC.Other characters
[
[SEQ.End
Lovercase characters:
[1.abc 2.def 3.ghi
[4.jkl 5.mno 6.pqrs
[7.tuv 8.wxyz
Numerical/simbol characters:
[1.1O 2.29 3.3.
[4.4, 5.5- 6.6/
[7.7: 8.8<>
[ALARM NO.1
[----------------------------]
[ 1.Type: Normally Open
[ 2.Reset: Cont
[ 3.Relay activation:
[ 4.Buzzer activation: NO
[ 5.Acknowledge: 1,2,3,4
[ 6.Action: CO4:MO2,R01:P03
[
[INC.Next Alarm
[DEC.Previous Alarm
[SEQ.End
[ALARM NO.1 RESET
[----------------------------]
[ 1.Momentary: NO
[ 2.Keyboard : YES
[ 3.External : YES
[
[ -.Time: After 2 seconds
[ CLEAR.< ENTER.>
[
[INC.Next Alarm
[DEC.Previous Alarm
[SEQ.End
4]
Identification text submenu
]
Each input video is identified by a text string with max. 28 characters. The
]
cursor > indicates the active text, which can be modified. Press
]
]
choose the text to be modified,
]
main menu.
]
]
]
]
]
4.1]
Text modify submenu
]
The first line shows which camera's text identification is in the process of being
modified. The next line shows the text inserted so far. The flashing # cursor
]
shows the insertion point for other characters, if desired.
]
]
]
The text insertion method is that commonly used for mobile phones. Pressing
]
the key will select the letter 'A'; if
]
]
the letter 'B' will be selected, and pressing
]
second's wait the choice will be accepted and the # cursor will move forward by
one position.
]
]
and
]
case", "numeric/symbols".
Other characters are selected in the same way: for example 'S' is obtained by
]
pressing the
]
]
"numeric/symbols" set and pressing
deletes the last character inserted and
text.
When insertion has been completed, press
5]
Alarms submenu
]
The matrix is provided with an alarm contact for each input. For further details
]
see section 4.2 Alarms.
YES ]
The alarm contact number being modified is shown on the first line; change the
]
]
number by pressing
]
Press to select the alarm type (normally open, normally closed, not used).
]
]
Press to enter the submenu for defining Reset. Press
]
enable/disable relay closure and for buzzer enabling when the alarm is active.
]
Press to enter the submenu for defining alarm recognition.
Press to define the action on alarm. Press
menu.
5.2]
Reset Alarms submenu
]
Press to define the alarm type (continuous or impulsive). Press
]
to enable/disable reset by keyboard or by external impulse.
]
]
Press and
]
]
]
Press /
]
] return to the previous menu.
]
to make the change or
can be used to select the character sets: "upper case", "lower
key 4 times. The number '9' is obtained by selecting the
and .
to enable and change reset time.
to pass to definition of the next/previous alarm. Press
Page 27
to return to the
is pressed again within one second
again will select 'C'. After one
twice.
adds a space to the inserted
to return to the previous menu.
and
to return to the previous
MNVCSM84A_0408
/ to
to
and
to