Replacing The Light Bulb; Transportation And Changing Of Installation Position; Repositioning The Door - VESTEL VEKK5025 Guide D'utilisation

Replacing the Light bulb

When replacing the bulb of the refrigerator compartment;
1. Unplug the unit from the power supply,
2. Press the hooks on the sides of the light cover top and remove the light cover
3. Change the present light bulb with a new one of not more than 15 W.
4. Replace the light cover and after waiting 5 minutes plug the unit.
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
PART - 5. TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation position, all
the moving objects (ie,shelves,crisper...) should be taken
out or fixed with bands in order to prevent them from getting
damaged.
! Carry your fridge in the upright position.

Repositioning the door

• It is not possible to change the opening direction of your refrigerator door, if the door
handles on your refrigerator are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your refrigerator may be changed, you should contact the
nearest authorised service agent to have the opening direction changed.
EN - 36 -