IKA-WERKE C 5030 Mode D'emploi page 11

C 5030
Error:
Cause:
Remedy:
Error:
Cause:
Remedy:
Error:
Cause:
Remedy:
Error:
Cause:
Remedy:
C 7030
Error:
Cause:
Remedy:
Error:
Cause:
Remedy:
Error:
Cause:
Remedy:
C5030/7030 0399
Decomposition valve is not expanded.
Flask capillary is deformed.
Replace flask.
Leakage on venting head when expanding..
Sealing washer missing or defective.
Replace sealing.
Flask in venting head does not retract.
Flask boring is dirty or the pressure spring is defective.
Clean or replace spring.
Leakage on throttle valve
O-ring on throttle screw defective.
Replace O-ring.
Leakage on venting head when expanding.
Sealing washer missing or defective.
Turn the venting screw counterclockkwise until it
comes completely out and replace the O-ring (Pos,
23); or pry O-ring Pos. 22 out of the venting handle
and set a new ring in place.
Leckage on the throttle valve.
O-ring on trotthle srew defective,
Turn the throttle screw counterclockwise until it co-
mes completely out and replsce the o-ring(Pos. 45)
Throttle valve exhibits high leakage rate when it is
closed.
Needle valve of the throttle screw is excessively
ty or corroded.
Screw throttle screw completely out. Clean or
replace.
S p a r
C 5030
Venting head Gas washing bottle strap retainer
Item 3 Flask, complete Item 4 Spring washer
Item 11 O-ring Item 7 O-ring
Item 12 Sealing washer Item 8 Throttle screw
Item 13 Pressure spring
Item 14 O-ring
Item 80 Countersunk screw
C 7030
Pos. 2 Gas washing bottle Pos. 23
Pos. 3 GL-bolting Pos. 24
Pos. 4 Pressure hose Pos. 40
Pos. 5 ground clamp Pos. 41
Pos. 7 Base plate Pos. 42
Pos. 9 Rubber plate Pos. 43
Pos. 10 Rubber foot Pos. 44
Pos. 11 Discharge hose Pos. 45
Pos. 20 Venting adapter Pos. 46
Pos. 21 bolting Pos. 47
Pos. 22 O - ring Pos. 48
O - ring
knurled screw
ring
Adapter plate
Spring washer
distance piece
Venting head
O - Ring
Throttle screw
knurled screw
bolting
11