Warranty - Gladiator GEARTRACK Instructions D'installation

Install the Horizontal Bike Hook
Horizontal Bike Hook
When not in use, bike hook may be rotated to the side so it
■
lies flat against the bracket.
1. Engage the bracket rims on the horizontal bike hook into the
slots in the GearWall panel or GearTrack
®
up, pushing toward the wall and lowering the rims into the
slots.
2. Inspect the bracket from the side to ensure the rims are fully
engaged in the slots as shown.
For warranty information:
In U.S.A. call 1-866-342-4089 or visit our website at
www.GladiatorGW.com
In Canada call 1-800-807-6777 or visit our website at
www.gladiatorgarageworks.ca
There are many benefits for registering the product. Find out more and register the product online at www.gladiatorgarageworks.com.
■
1. Measure the length of the storage bin 4" (10.2 cm) to
channel by lifting
®
2. Install the storage bin holders into the slots in the GearWall
3. Inspect the bracket from the side to ensure the rims are fully
4. Set the storage bin into the bin holders so that the bottom

WARRANTY

Install the Storage Bin Holder
Storage Bin Holder
Designed to be used as a pair, the bin holders will support
one storage bin up to a maximum 18 gallon size.
5" (12.7 cm) from the bottom.
panel or GearTrack channel so that distance between the top
®
of the holders is the same as the length of the storage bin.
NOTE : Engage the bracket rims into the slots by lifting up,
pushing toward the wall and lowering the rims into the slots.
engaged in the slots as shown.
and sides are supported by the storage bin holders.
®
14