AEG BBS 4827 Mode D'emploi page 59

Symptoms
No audio signal during
Bluetooth connection
Cannot connect
speaker
Technical Specifications
Model: .......................................................................................................................................BSS 4827
Audio connection: ........................................................................................3.5 mm stereo jack plug
Protection rating: .............................................................................................................................IPX 4
Net weight: ................................................................................................................. approx. 0.441 kg
Power supply: ...............................................................................................................................DC 5 V
Battery: ......................................................................................................3.7 V 500 mAh lithium-Ions
Charging time: ...........................................................................................................approx. 1 hour
Operating time: .......................................................................................................approx. 8 hours
Possible cause
Speaker is switched off
Speaker is not paired to the
audio source.
Audio cable is connected.
Volume too low
Pairing does not work
Audio source is turned off
Bluetooth is turned off on
the audio source.
Bluetooth version is not sup-
ported.
English
Solution
Switch the speaker on.
Check whether the connection
exists. If necessary, pair the speaker
to the audio source again.
The Bluetooth connection is auto-
matically separated when a cable
is connected to the 3.5 mm plug.
Remove the cable.
Press and hold the VOL+
on the speaker to increase the
volume. If there is still no sound,
turn the volume control (2).
Increase the volume on the audio
source.
Check, whether the audio source
supports the A2DP protocol.
Turn the audio source on
Turn the Bluetooth function on in
the audio source.
Use another playback unit.
59
button