Fan Switch (Auto/On) - Honeywell Rth3100C Mode D'emploi
Thermostat numérique non programmable - thermopompe
Table des Matières
Les langues disponibles
Les langues disponibles
Operating Manual
Fan switch
Set FAN switch to choose whether the fan
runs continuously or only as needed.
69-2339EFS—01
Set the FAN switch to Auto or On.
In "Auto" mode (the most commonly used
setting), the fan runs only when the heat-
ing or cooling system is on.
If set to "On," the fan runs continuously.
M29558
6
Chapitres
Table des Matières
