2 Controls and Connections
1, AES/EBU-IN
A digital AES/EBU input (AES3) is provided in addition to internal analog inputs.
The digital input signal has to be connected to the AES/EBU IN connector. The
AES/EBU input is a balanced transformer-isolated input. A sampling rate
converter translates the input signal to match the internal sampling rate.
However, the possibility to synchronize the RCM-26 to an external sampling rate
exists as well. For further details, please refer to the IRIS-Net™ help files. The
following illustration shows the pin-assignment of the input socket.
Illustration 2.1: Pin-assignment of AES/EBU-IN
RCM-26 Remote Control Module
Owner's Manual
11