Télécharger Imprimer la page

INFOSEC UPS SYSTEM E3 Performance 800 RT Notice D'utilisation page 49

Publicité

Les langues disponibles

Les langues disponibles

Battery backup time is shorter than nominal
value
Fault code is shown as 45 on LCD display.
At the same time, alarm is continuously
sounding.
5 . S T O R A G E A N D M A I N T E N A N C E
5.1 Warning indicator
The UPS system contains no user-serviceable parts. If the battery service life (3~5
years at 25°C ambient temperature) has been exceeded, the batteries must be
replaced. In this case, please contact your dealer.
5.2 Storage
Before storing, charge the UPS 5 hours. Store the UPS covered and upright in a cool, dry
location. During storage, recharge the battery in accordance with the following table:
Storage Temperature
-25°C - 40°C
40°C - 45°C
6 . A v a i l a b l e o p t i o n s
Here are the options available :
SNMP vm Minislot card (Virtual environment)
External Bypass RM-IEC (External Bypass manual)
External Bypass RM-FR (External Bypass manual)
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 02 17 AA 59 204 40
Recharge Frequency
Designation
SNMP I Pro communication card
RS485 protocol card
Kit Rack
Dry contact card
Batteries are not fully
charged.
Batteries defect.
The charger does not
have output and battery
voltage is less than
10V/PC.
Every 3 months
Every 2 months
Charge the batteries for at
least 5 hours and then
check capacity. If the
problem still persists,
consult your dealer.
Contact your dealer to
replace the battery.
Contact your dealer.
Charging Duration
1-2 hours
1-2 hours
Ref.
61156
61142
61439
61429
61454
61442
61443
49

Publicité

loading