INFOSEC UPS SYSTEM E3 Performance 800 RT Notice D'utilisation page 38

3 . O P E R A T I O N S
3.1 Buttons operation
Buttons
ON/MUTE button
OFF/ENTER button
SELECT button
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
38
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 02 17 AA 59 204 40
Button view
Turn on the UPS: Press and hold ON/MUTE button for at least

2 seconds to turn on the UPS.
Mute the alarm: When the UPS is turned on in battery mode, press

and hold this button for at least 3 seconds to disable or enable the
alarm system. This is not applied to the situations when warnings or
errors occur.
Up selection key: Press this button to display previous selection in

UPS setting mode.
Switch to UPS self-test mode: Press and hold ON/MUTE buttons for

3 seconds to enter UPS self-testing while in AC mode.
Turn off the UPS: Press and hold this button at least 2 seconds to turn

off the UPS.
Confirm selection key: Press this button to confirm selection in UPS

setting mode.
Switch LCD message: Press this button to change the LCD message

for input voltage, input frequency, battery voltage, output voltage and
output frequency.
Setting mode: Press and hold this button for 3 seconds to enter UPS

setting mode only when UPS is off.
Down selection key: Press this button to display next selection in UPS

setting mode.
Functions