Setting (Resetting) Date And Time - Tanita BC-313 Mode D'emploi

SETTING (RESETTING) DATE AND TIME

1. Set Date
Insert batteries into the scale and then press the SET button
to start the Year setting. Press the Up/Down buttons to set
year and then press the SET button. The unit will beep once
to confirm.
2. Set Hour
Press the Up/Down buttons to set hour and then press the
SET button.
The unit will beep once to confirm.
3. Set Minute
Press the Up/Down buttons to set minute and then press
the SET button.
The unit will beep twice to confirm the programming.
The power will then shut down automatically.
Note:
• After you replace the batteries or if you want to reset date and time,press and hold the SET button to begin the date and time
programming process. Replacing the batteries will cause the loss of date and time settings.
• 60 seconds or more of inactivity will cause automatic shut off during this process. No data will be saved as a result.
• If you make a mistake or wish to turn the unit off before you complete the programming, press the OFF button to turn the unit off.
No data will be saved as a result.
4