Velleman DVM8869 Mode D'emploi

DVM8869 -- MINI INFRARED THERMOMETER
1. Introduction
Thank you for buying the DVM8869 ! Thanks to the IR sensor and the laser pointer, this device is able to measure its
target's temperature from a distance. The readings are automatically held for 5 seconds and the device is also
equipped with a backlight. Measured temperatures are displayed either in °C or °F.
2. Features
• precise measurements without actual contact with the target
• switchable temperature units (°C/°F)
• automatic data-hold function
• laser pointer
3. Safety
• Do not point the beam at the human eye or at the eyes of animals.
• Do not aim the beam at reflective surfaces as the reflected beam might hit one of your eyes.
• Do not use the device in proximity of explosive gases.
• Take the diameter of the beam into consideration. The diameter of the beam is calculated by dividing the distance
to the target by eight, e.g. the diameter of the beam is 100mm if the distance from the device to the target is
800mm.
4. Specifications
Display
Measurement Range
Sample Rate
Power Off
Operating Temperature
Operating Humidity
Power Supply
Current Consumption
Weight
Dimensions
Resolution
Accuracy
Ratio Distance/Ø Beam
DVM8869
SPECIFICATIONS
LCD display with backlight
0 - 788°F / -20 - 420°C
Automatic deactivation after 5 seconds
max. relative humidity 80%
6.7 x 1.7 x 1.6" / 170 x 44 x 40mm
From -20 to +100°C : ± 2% of reading or 2°C (whichever value is largest)
From +101 to 420°C : ± 3% of reading or 3°C (whichever value is largest)
1
1 measurement/sec.
32 - 122°F / 0 - 50°C
9V-battery
± 12mA DC
200g/6.4oz.
1°C/°F
8 : 1
VELLEMAN