Existing System Installation - Dell LSI21320-IS Guide De Démarrage Rapide

Quick_Start_Guide_IS.book Page 18 Thursday, May 15, 2003 4:53 PM
18
Integrated Striping Quick Start Guide
The system prompts for the manufacturer-supplied hardware support
disk.
Insert the LSI21320 driver diskette containing the Windows 2000
4
device driver required to support the LSI21320 host adapter and press
<Enter>.
Select the Windows 2000 driver from the menu by highlighting it and
5
press <Enter>.
Press <Enter>.
6
Return to the Windows 2000 Setup screen.
Press <Enter>.
7
The message about setup loading files appears.
®
Follow the Microsoft
8
point.
Refer to your system's documentation.

Existing System Installation

This procedure installs or upgrades the SYMMPI.SYS driver onto an
existing Windows 2000 system. When the LSI21320 Dual Channel
Ultra320 SCSI to PCI-X host adapter is added to an existing system
installation, the new adapter is automatically detected at the next reboot.
When the Device Driver Wizard appears at boot, click the Next button
and continue at step 8 below.
To install the SYMMPI.SYS driver, follow these steps:
Click the Update Driver button to update the existing driver.
1
The Upgrade Device Driver Wizard begins.
Click the Next button.
2
Click the Display a list of known drivers... button to
3
select it, then click the Next button.
Click the Have Disk button and type the path to the driver, or click
4
the Browse button. After the path to the driver has been established,
click the OK button.
Select the driver from the list and click the Next button.
5
Windows 2000 installation procedure at this