Disposal; Manufacturer's Warranty - Dx Tools; Ec Declaration Of Conformity (Original) - Hilti DX 351 Mode D'emploi

11. Disposal

Most of the materials from which Hilti power actuated tools are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back your old powder actuated tools for recycling. Please ask your Hilti customer service department or
Hilti sales representative for further information.
en
Should you wish to return the power actuated tool yourself to a disposal facility for recycling, proceed as follows:
Dismantle the tools as far as possible without the need for special tools.
Separate the individual parts as follows:
Part / assembly
Toolbox
Outer casing
Screws, small parts
Used cartridge strip
12. Manufacturer's warranty – DX tools
Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts, or other products of equiv-
alent quality, may be used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement as
a result of normal wear and tear are not covered by this
warranty.
Additional claims are excluded, unless stringent nation-

13. EC declaration of conformity (original)

Designation:
Type:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2011/65/EU.
Hilti Corporation, Feldkircherstrasse 100,
FL-9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Management Head BU Measuring Systems
BU Direct Fastening
08/2012
14
Printed: 12.08.2013 | Doc-Nr: PUB / 5069823 / 000 / 02
Main material
Plastic
Plastic / synthetic rubber
Steel
Plastic / steel
Powder-actuated tool
DX 351
2000
Tassilo Deinzer
BU Measuring Systems
08/2012
Recycling
Plastics recycling
Plastics recycling
Scrap metal
According to local regulations
al rules prohibit such exclusion. In particular, Hilti is
not obligated for direct, indirect, incidental or conse-
quential damages, losses or expenses in connection
with, or by reason of, the use of, or inability to use the
tool for any purpose. Implied warranties of mer-
chantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland