DeWalt DW383 Mode D'emploi page 25

Package contents
The package contains:
1 Circular Saw with 1 general purpose TCT blade
1 Parallel fence
1 Saw blade wrench
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your D WALT DW383 Circular Saw is a versatile
E
Power Tool that has been designed for professional
sawing of wood and plastic. Abrasive cutting wheels
are available for cutting metal and stone.
1 ON/OFF-switch with lock-off device
2 Carrying handle
3 Locking lever for depth of cut
4 Motor cover
5 Front handle
6 Parallel fence
7 Blade guard
8 Blade bolt
9 Riving knife
10 Saw shoe
11 Dust extraction outlet
12 Bevel scale
13 Locking screw for bevel locking system
14 Locking screw for parallel fence
15 Mark for bevel cut
16 Mark for straight cut
17 Parallel fence scale
18 Bolt
19 Hole
20 Bracket
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated
E
in accordance with EN 50144;
therefore no earth wire is required.
17
DW383.PM65
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
For 115 V units with a power rating exceeding 1500 W,
we recommend to fit a plug to BS4343 standard.
Using an extension cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data). The minimum conductor
size is 1.5 mm
When using a cable reel, always unwind the cable
completely.
17
WALT repair agent or a qualified electrician.
Never use a light socket.
Never connect the live (L) or neutral (N)
wires to the earth pin marked E or
2 .
21-05-2001, 10:05
E N G L I S H
.
en - 4