Alcad GRF-302 Mode D'emploi page 22

V Í D E O P O R T E R O
8
Make the connections between the audio unit and
the different elements of the panel (pushbuttons,
speaker-microphone module, camera module,
etc.). See “How to connect the audio unit to the
pushbutton panel”, page 18.
9
Programme the connections brackets/telephones
from the main entrance panel (see the technical
datasheet that comes with the connections
bracket/telephone).
11
Place the protective cover of the audio unit in
position.
2 H I L O S - 2 - W I R E V I D E O D O O R E N T R Y
10
Adjust the volume level on the entrance panel (1)
and on the monitors/telephones (2).
12
Fix the panel to the flush-mounted box. See the
datasheet of the pushbutton entrance panel.
S Y S T E M S - V I D É O P O R T I E R 2 F I L S