Alcad GRF-302 Mode D'emploi page 21

V Í D E O P O R T E R O
4
When the connections have been made, decide
which panel will be the main panel of the system
(i.e. the panel from which the connection
brackets/telephones are programmed). If
necessary, assign a different number to each
entrance panel of the other points of entry
(secondary panels), starting with the number 1.
PRINCIPAL
PRINCIPALE
6
Put the speaker-microphone module in position
and press firmly to fix it to the pushbutton panel.
2 H I L O S - 2 - W I R E
PLACAS DE CALLE
ENTRANCE PANELS
PLAQUES DE RUE
SECUNDARIAS
MAIN SECONDARY
SECONDARIES
1
2
3
4
5
V I D E O D O O R E N T R Y
5
Place the front module in the window of the
pushbutton panel in such a way that the tabs of
this module (1) clip into the guides on the sides
of the window (2). Press firmly to fix the front
module to the panel (3).
7
Fix the panel onto the hinges of the flush-mounted
box. See the datasheet of the pushbutton entrance
panel.
S Y S T E M S - V I D É O P O R T I E R 2 F I L S