Maintenance; Warranty - Haussmann 8400048 Manuel De L'utilisateur

MAINTENANCE

MAINTENANCE
WARNING. Always ensure that the tool is switched off and the plug
is removed from the power point before making any adjustments or
maintenance procedures.
CLEANING
1. Keep the tool's air vents unclogged and clean at all times.
2. Remove dust and dirt regularly. Cleaning is best done with a rag.
3. Re-lubricate all moving parts at regular intervals.
4. If the body of the saw needs cleaning, wipe it with a soft damp cloth.
A mild detergent can be used but nothing like alcohol, petrol or other
cleaning agent.
5. Never use caustic agents to clean plastic parts.
CAUTION. Water must never come into contact with the tool.
GENERAL INSPECTION
Regularly check that all the fixing screws are tight. They may vibrate loose
over time.
REPAIRS
Only an authorized service centre should carry out tool repairs. If the cordset is
damaged or worn, have it repaired or replaced by an authorized service centre.

WARRANTY

Thank you for investing in a HAUSSMANN power tool. These products have
been made to demanding, high-quality standards and are guaranteed for
domestic use against manufacturing faults for a period of 36 months from the
date of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction
of your tool (failure, missing part, etc.), please contact one of our service
technician at our toll free service line at 1-866-206-0888 from 8 AM to 6 PM,
Monday to Friday, Eastern time. RONA reserves the right to repair or replace the
defective tool, at its discretion.
Normal wear and tear, including accessory wear, is not covered under guarantee.
The product is guaranteed for 36 months if used for normal trade purposes. Any
guarantee is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair other than by an authorized agent. Heavy-
duty, daily professional or hire usage are not guaranteed. Due to continuous
product improvement, we reserve the right to change the product specification
without prior notice.
24 25