AEG SR 4359 BT Mode D'emploi page 51

NOTE:
Adjust the volume of the external device to a comfortable
level.
Cleaning and Maintenance
WARNING:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
Batteries too weak. Insert new batteries
CD jumps dur- Check the disc for
ing playback. fingerprints, dirt or
scratches.
Device cannot Device crashes and
be operated. "hangs".
No audio The device is not
signal during registered with the
bluetooth con- audio source.
nection.
Volume too low.
Device can not Registration does
be connected. not work.
Audio source is
shut off.
Bluetooth is shut
off on the audio
source.
Bluetooth version
is not supported.
Technical Data
Model: ............................................................................. SR 4359 BT
Power supply: ............................................... 100-240 V~, 50/60 Hz
Battery operation: ..................................8 x 1.5 V, Type UM2/R 14
Power consumption:.................................................................48 W
Protection class: ................................................................................II
Net weight: ..............................................................approx. 3.34 kg
Radio section:
Bluetooth
Bluetooth support: ........................................................V2.1 + EDR
Range: ..................................................................approx. 15 metres
Transmission frequency: ......................................2.402-2.480 GHz
Protocols: ....................................................................A2DP/AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
Solution
reserved.
Ensure that the disc is
inserted with the label
This device has been tested according to all relevant current
facing upwards.
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
or operate the device with the latest safety regulations.
with the mains lead.
Check the disc for
fingerprints, dirt or
scratches.
Disconnect the power
supply for 5 sec. Then
Disposal
switch the device on
again.
Meaning of the "Dustbin" Symbol
Ensure that there is a
Protect our environment: do not dispose of electrical equip-
connection. Register
ment in the domestic waste.
the device with the
Please return any electrical equipment that you will no longer
audio source again, if
use to the collection points provided for their disposal.
necessary.
Increase the volume
This helps avoid the potential effects of incorrect disposal on
on the device.
the environment and human health.
Increase the volume
This will contribute to the recycling and other forms of reutili-
on the audio source.
sation of electrical and electronic equipment.
Check to see if the
Information concerning where the equipment can be dis-
audio source supports
posed of can be obtained from your local authority.
the A2DP protocol.
Turn on the audio
source.
Turn on the Bluetooth
function on the audio
source.
Use a different play-
back device.
Frequency ranges: ...............................FM 87.5 ~ 108.0 MHz
English
51