Publicité
Les langues disponibles
Les langues disponibles
5.
Install the new wick with the fibreglass section
upwards.
6.
The top of the wick must be aligned with the
top edge of the holder. Press the wick
outwards from the inside so that it is fixed with
the absorber under.
7.
Reinstall the parts in reverse order.
8.
Make sure the wick can be adjusted up and
down.
Emptying the tank
WARNING! Used fuel must be disposed of in compliance with local regulations.
Empty the tank as instructed below:
1.
Make sure the heater is extinguished and cooled.
2.
Empty the tank outdoors.
3.
Remove the fuel cap and empty the contents into a suitable container.
4.
Clean by flushing several times with 100% pure paraffin.
5.
Fill with 100% pure fuel as described above.
6.
Test run the heater in a safe place outdoors.
ENGLISH
22
Publicité
