Maintenance And Cleaning; Function Test; Cleaning; Disposal - Abus IPCB24500 Manuel Utilisateur

11.

Maintenance and cleaning

11.1 Function test

Regularly check the technical safety of the product, e.g. check the housing for damage.
If it seems that it may no longer be possible to operate the device safely, stop using the product
and secure it to prevent unintentional use.
It is likely that safe operation is no longer possible in the event that:

the device shows signs of visible damage

the device no longer works correctly

the device has been stored in adverse conditions for a long period of time

the device has been exposed to stresses during transportation.
Please note:
You do not need to perform any maintenance on the product. There are no
components requiring servicing or checking inside the product. Never open it.

11.2 Cleaning

Clean the product with a clean, dry cloth. The cloth can be dampened with lukewarm water if
there is dirt that is hard to remove.
Make sure that no liquids enter the inside of the device, as this
will destroy it. Do not use any chemical cleaning agents, as these could
damage the surface of the housing.

12. Disposal

Devices displaying this symbol may not be disposed of with domestic waste. At
the end of its service life, dispose of the product according to the applicable legal
requirements.
Please contact your dealer or dispose of the products at the local collection point
for electronic waste.
93