Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
SPECIFICATIONS
BACK PACK POWER SUPPLY
Model
Battery capacity
Output voltage
Adapter output
Maximum output current
Output voltage
USB output
terminal
Maximum output current
Operating temperature range
Adapter cable length
Large-capacity power dimensions
Large-capacity power
Power adapter
Weight
Carrier
CHARGER
Model
Recharging time
(at an ambient temperature of 68 °F (20 °C))
Recharge voltage
Weight
APPLICATIONS
○ Power Supply for Hitachi Cordless Power Tools (DC36V)
○ Power Supply for USB-Connection Equipment (DC5V).
ASSEMBLING THE BACK PACK POWER SUPPLY
1.
The large-capacity power output cable can be withdrawn
from either side.
Decide on the best side for operations, and then insert the
output cable into the cable groove.
The direction of the cable can be easily amended after it
has been set in position. (Fig. 3)
2. Attach the carrier to the large-capacity power supply with
the four M5 screws supplied with the use of a Phillips
screwdriver.
Tighten the two knob bolts by hand to stabilize the
position of the output cable.
The knob bolts can be removed by hand so that the
direction of the output cable can easily be changed at any
time. (Fig. 4)
3. Pass the carrier strap through the attachment hole on the
large-capacity power supply from the back, and fi x it in
place in two locations as shown in the illustration. (Fig. 5)
10
BL36200
Li-ion DC 36 V 21 Ah (21000 mAh) 80 cells
DC 36 V
50 A
DC 5 V
0.5 A
32 °F – 104 °F (0 °C – 40 °C)
5 ft (1.5 m)
13" × 4-19/64" × 9-27/32"
(330 mm × 250 mm × 109 mm)
13.9 lbs. (6.3 kg)
1.1 lbs. (0.5 kg)
2.2 lbs. (1.0 kg)
UC36YRSL
BSL3620: Approximately 60 minutes
BSL3626: Approximately 80 minutes
BL36200: Approximately 10 hours
14.4 V – 36 V
1.5 lbs. (0.7 kg)
Large-capacity
battery
Wiring
groove
Carrier
Large-capacity
battery
Output
cord
Fig. 3
M5 screws
(4 pcs)
Knob bolts
(2 pcs)
Fig. 4
Publicité
Table des Matières
