Bosch Rotak 37 LI Notice Originale page 26

Declaration of Conformity
Rotak 37 LI:
Measured values determined according to 2000/14/
EC (1.60 m height, 1 m distance away) and
EN ISO 5349.
Typically the A-weighted noise levels of the product
are: Sound pressure level 81 dB(A); Guaranteed
sound power level lower than 94 dB(A). Uncertainty
K = 3 dB.
The typical hand/arm vibration is below 2.5 m/s
We declare under our sole responsibility that the
product described under „Technical data" is in con-
formity with the following standards or standardiza-
tion documents: EN 50338 (battery powered prod-
uct) and EN 60335 (battery charger) according to
the provisions of the directives 2006/95/EC, 2004/
108/EC, 98/37/EC (until 28 Dec 2009), 2006/42/EC
(from 29 Dec 2009), 2000/14/EC.
2000/14/EC: Measured sound power level
92 dB(A).
Conformity assessment procedure according to An-
nex VI.
Notified body: SRL Sudbury, England
Notified body identification number: 1088
Technical file at: Bosch Lawn and Garden Ltd.,
PT-LG/EAE, Stowmarket, Suffolk IP14 1EY, Eng-
land
07
Leinfelden, 29.05.2008
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
26 • F016 L70 447 • TMS • 04.06.08
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification
English - 10
Rotak 43 LI:
Measured values determined according to 2000/14/
EC (1.60 m height, 1 m distance away) and
EN ISO 5349.
Typically the A-weighted noise levels of the product
are: Sound pressure level 84 dB(A); Guaranteed
sound power level lower than 96 dB(A). Uncertainty
K = 3 dB.
The typical hand/arm vibration is below 2.5 m/s
We declare under our sole responsibility that the
product described under „Technical data" is in con-
formity with the following standards or standardiza-
tion documents: EN 50338 (battery powered prod-
uct) and EN 60335 (battery charger) according to
the provisions of the directives 2006/95/EC, 2004/
108/EC, 98/37/EC (until 28 Dec 2009), 2006/42/EC
(from 29 Dec 2009), 2000/14/EC.
2000/14/EC: Measured sound power level
95 dB(A).
Conformity assessment procedure according to An-
nex VI.
Notified body: SRL Sudbury, England
Notified body identification number: 1088
Technical file at: Bosch Lawn and Garden Ltd.,
PT-LG/EAE, Stowmarket, Suffolk IP14 1EY, Eng-
land
07
Leinfelden, 29.05.2008
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
Subject to change without notice
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification