Technical Data; Classic 310 Technical Data; Classic 400 Technical Data - Steinbach Classic 310 Notice Originale

There is filter medium in the
pool
If the problem cannot be solved, contact the customer service listed on the last page.

Technical data

Classic 310 technical data

Model
Article number
Filter pump model
Circulation rate
Type of pump
Max. water temperature
Power supply
Output
Design
Vessel Ø
Connection
Pump installation
Required quantity of filter balls
Required quantity of quartz filter sand
Recommended grain size
Suitable for pools up to

Classic 400 technical data

Model
Article number
Filter pump model
Circulation rate
Type of pump
Quartz filter sand was
topped up.
Defective screens in the
filter vessel.
Classic 310
040310
SPS 50-1; art. no. 040921
4,500 l/h
self-priming with prefilter
35°C
220-240 V~ 50/60 Hz
250 W
7-way valve with manometer
320 mm
Ø 32/38 mm
on base plate
approx. 560 g
approx. 20 kg, DIN EN 12904
0.7 to 1.2 mm
22,000 l of water content
Classic 400
040340
SPS 70-1; art. no. 040920
6,600 l/h
self-priming with prefilter
Backflush the system until the
water runs clear. See section
"Backflushing".
Check the screens for damage and
replace if necessary.
61