Filtering Time; Operation With Floor Cleaner - Steinbach Classic 310 Notice Originale

Masquer les pouces Voir aussi pour Classic 310:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 68
WASTE
- The pool can only be drained up to the minimum water level at
the height of the suction line. Make sure to switch the pump off
once this level is reached to prevent the pump from running dry.
Use this mode to clean the pool in the case of heavy soiling.
The water is guided past the filter and discharged directly via the backwash line.
WINTER
- Never switch on the pump in this mode!
Use this mode to store the filter system in the winter.
The valve lever is in an intermediate position which relieves the inner valve components.

Filtering time

The pool's water content should be turned over at least three to five times in 24 hours
depending on the use and the size of the system. The operating time depends on the
output of the filter system and the pool size.

Operation with floor cleaner

Use a skimmer with a screen basket or similar device if your filter system
does not feature a prefilter to prevent foreign objects from damaging the
device.
Observe the instruction manual notes of the floor cleaner. Air must not
penetrate the filter system to prevent the system running dry and
overheating.
You can connect the hose of the floor cleaner directly to the suction line of the filter
system. The hose of the floor cleaner must be completely filled with water.
NOTICE!
NOTICE!
49

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

Classic 400

Table des Matières