SilverCrest 168754 Mode D'emploi page 4

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully
to ensure you fully understand the instructions. Ensure all users of the tool read and fully
understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
Risk of electrocution
Risk of fire!
Risk of explosion!
NO open flames!
No smoking!
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice
Class I construction (protective earth)
V
Volts
~ Alternating current
A
Ampere
n No load speed
o
Hz Hertz
W, kW
Watt, kilowatt
(revolutions or reciprocation)
/min or min
-1
per minute
4
Original Instructions
Specification
Input voltage range:......................................................................11-15V (12V) DC
Max input current:...........................................................100A (160A peak, 1 second)
Output voltage:...............................................................................................230V~
Output frequency:.............................................................................................50Hz
Waveform:...........................................................................................Modified Sine
USB output:......................................................................................5V DC, 500mA
Mains sockets:........................................................................................2 Universal
Mains socket protection class:.........................................................................
Max continuous output power:.........................................................1000 W (4.35A)
Surge capacity/time:............................................................1600W for one second
Efficiency:......................................................................................................>88%
No load current draw:....................................................................................<0,8A
Low voltage alarm:.................................................................................10.5±0.5V
Low voltage shutdown:...........................................................................10±0.5V
High voltage cut-off:........................................................................... 15.5±0.3V
Maximum operating temperature:............................................................... <65°C
Recommended ambient temperature:........................................................10-27°C
Protection features:............................................................ Input over voltage (16V)
Earth/Ground :......................Inverter case connected to AC mains socket earth pin
Dimensions:................................................................................250 x 165 x 72mm
Weight : ...........................................................................................................2.2kg
As part of our ongoing product development, specifications of Silverline products may
alter without notice.
General Safety
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
WARNING: This device is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the device by a person responsible for
their safety. Children must be supervised to ensure that they do not play
with the device.
Save all warnings and instructions for future reference.
1) Work area safety
a) Do not operate electrical devices in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Electrical devices
create sparks which may ignite the dust or fumes.
2) Electrical safety
a) Electrical plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) devices.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose non-waterproof electrical devices to rain or wet
conditions. Do not submerge non-pressure-rated devices in water.
Water entering an electrical device will increase the risk of electric shock.
d) Do not abuse the power lead. Never use the lead for carrying,
pulling or unplugging the device. Keep lead away from heat, oil, sharp
edges or moving parts. Damaged or entangled power leads increase the
risk of electric shock.
e) If operating an electrical device in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
WARNING: When used in Australia or New Zealand, it is recommended that
devices are ALWAYS supplied via Residual Current Device (RCD) with a rated
residual current of 30mA or less.
Input low voltage
Output overload
Output short-circuit
Overheat (65˚C)