Sony SNT-V304 Guide De L'utilisateur page 21

Setting Pan/Tilt Camera Preset Position
The (Preset Positions) icon is used to set preset
positions for a pan/tilt camera.
The administrator can set and name up to 20 preset
positions for a video camera. Users can then position
the video camera quickly and accurately by merely
recalling a preset position.
The following example describes connection of an
EVI-D30/D31/G20/G21.
1
Click the [Preset Positions] button on the page to
set the video camera ID numbers (see page 20).
The "Preset Positions" page appears in a new
window.
2
Observe the sample video camera image while
adjusting the camera position using the [Pan],
[Tilt] and [Zoom] control bars.
z Hint
• When [Kalatel] is selected as the pan and tilt
driver, the [FOCUS] and [IRIS] control buttons
appear.
• See "Pan/Tilt/Zoom Control" (page 30) for
details regarding the functions of the control bar
and control buttons.
3
Enter a name (up to 16 characters) for the preset
position in the [Current position] text box.
z Hint
When Kalatel is selected as the pan and tilt driver,
if you input the preset name as follows, you can
move the video camera to various preset positions
by clicking [HOME].
For Camera1: home1
For Camera2: home2
For Camera3: home3
For Camera4: home4
4
Click the "Save" icon.
The name of the preset position is added to the
[Preset positions] drop-down list.
5
To delete an existing preset position, select the
name of the position in the [Preset positions] drop-
down list, and click the [Remove] button.
6
Click the [Close] button when finished with the
settings.
The "Preset Positions" page closes.
HSR-1/1P/2/2P Setup
The (HSR) icon is displayed when HSR-1/1P/2/
2P is selected for the serial port usage. When an HSR-
1/1P/2/2P is connected to the video network station's
COM1 terminal, if the "HSR" icon does not appear
next to the "COM1" icon, reset the serial port usage by
referring to "Serial Port Settings" on page 19.
Click the "HSR" icon to display the "Sony HSR
Settings" page.
Use the (SETUP) icon to make HSR-1/1P/2/2P
settings from the Web page. Clicking the "Setup" icon
displays the "SETUP MENU".
The (MAINTENANCE) icon is used to display
information for servicing an HSR-1/1P/2/2P unit.
Clicking the "MAINTENANCE" icon displays the
"MAINTENANCE MENU". Refer to the HSR-1/1P/2/
2P Users Guide for details of HSR-1/1P/2/2P settings.
Before making any settings, see the following "HSR-1/
1P/2/2P Setting Precautions".
21