Network Settings - Sony SNT-V304 Guide De L'utilisateur

• When an alarm event occurs while the pop-up
window is displayed, the time set for the [Alarm
duration] is extended. A second pop-up window will
not appear.
Upload Settings
[Upload (FTP)] settings are made through dialog boxes
that are displayed for [Input 1] (Video Input 1) to
[Input 4] (Video Input 4).
Setting Description
Primary Time FTP transfer is enabled when this box
Enabled is checked.
Always FTP transfer is always enabled when
this radio button is selected.
Restricted Alarm input is enabled for a specific
Between time of day when this radio button is
selected.
Start When the [Restricted Between] radio
button is selected, enter the start time
here.
Stop When the [Restricted Between] radio
button is selected, enter the stop time
here.
Mon to Sun Check the boxes to specify particular
days on which the FTP transfer should
be enabled.
Primary Image Sets the FTP image transfer interval.
Frequency Select any of seconds, minutes, or
hours, then input the time (a numerical
value).
Take Pictures Selects the FTP transfer conditions.
Secondary Time Select this check box to enable alarm
Enabled input when outside the time range set
with [Primary Time Enabled].
Secondary Image Sets the FTP image transfer interval.
Frequency Select any of second, minute or hour,
then input the time (a numerical value).
Take Pictures Selects the FTP transfer conditions.
Host Name Enter the host name of the transfer
destination.
User Name Enter the user's name on the host at
the transfer destination.
Password Enter the password of the above user.
Use Passive Mode To use Passive mode, select this
check box.
FTP Port Number Enter the port number.
Upload Path Enter the path of the save destination
for image files sent by ftp to a host.
Base File Name Enter the file name prefix (the fixed
part of the file name) to be assigned to
image files sent.
Setting Description
Overwrite To always overwrite the same file
name, select this radio button.
Date/Time Suffix Select this radio button to append the
date and time to the base file name.
Sequence Number Select this radio button to append a
Suffix set to sequential number to the prefix.
Maximum
Sequence Number When appending a sequential number
Suffix up to: to the prefix, select this radio button
and enter a value to specify a
maximum for the number.
Relay-OUT Settings
Setting Description
Taggle Select this radio button to activate or
deactivate relay output by clicking the
[RELAY] button.
Timed duration Select this radio button and enter the
relay output activation time in the box
to activate timed relay output by
clicking the [RELAY] button. You can
set this between 1 and 30 seconds.
Note
To control relay output with the [RELAY] button, you
must make settings that keep the alarm input from
activating or deactivating relay output. Select [Alarm]
using the "Layout and Application Wizard" (see page
13) and set [Relay-OUT at Alarm] to [Disable].

Network Settings

The (Network Settings) icon is used for settings
related to the supporting network protocol. Clicking
the "Network Setting"s icon displays the following
screen.
15