Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Monitor Screen and Alarm
Function Setup
The
(Application Design) icon is used to configure
the monitor screen display and to determine the
operation of the video network station when an alarm
event occurs. Clicking the "Application Design" icon
displays the following screen.
Clicking the
(Layout and Application Wizard)
icon displays the "Layout and Application Wizard".
The wizard first displays a configuration selection
screen. The choices displayed in the screen are
explained below.
• [Layout]:Sets the monitor display style.
• [Alarm]:Sets the reaction to an alarm and the alarm
input.
• [Upload (FTP)]:Sets FTP image transfer.
• [Relay-OUT]:Sets the relay output for when the
[RELAY] button is clicked.
Note
It is only possible to set one [Alarm] or [Upload
(FTP)] for each video signal.
Layout Settings
Setting
Description
Which view do you
Select which image is tnl™e initially
want to display as
displayed when the user accesses the
monitor screen:
default when
opening the Web
• Camera View
interface?
Displays the video camera image
• HSR View
Displays the HSR-1/1P/2/2P image
What type of
Select the image size for the monitor
screen from the following:
image do you want
to show in Web
• Fullsize
pages?
Display 352 ¥ 240 NTSC or 352 ¥
288 PAL
• Fullsize × 2
Enlarges and displays Fullsize image
data in Hugesize (704 × 480 NTSC or
704 × 576 PAL).
• Hugesize
Display 704 ¥ 480 NTSC or 704 ¥
576 PAL
What format do
Select the images and layout to be
you want ALL in
displayed on the monitor in the ALL
camera view to be
mode from the following:
in?
• All cameras
All video camera images are
displayed.
• Camera 1 and 2 horisontally aligned
Images of the video cameras
connected to VIDEO 1 and 2
terminals are displayed side by side.
• Camera 1 and 2 vertically aligned
Images of the video cameras
connected to VIDEO 1 and 2
terminals are displayed one above
the other.
• Camera 1
Displays the video camera image
connected to the VIDEO 1 terminal.
Woud you like to
Select whether to display the Sony
logo at the top of the page: either
display the Sony
logo?
[Yes] (display) or [No] (no logo).
Please enter the
Enter an image display interval for
time for sequential
each of the four video sources. Setting
switching:
0 for a video source causes it to not be
displayed on sequential mode. Also, if
a short interval is set, the image may
not be displayed, depending on
network conditions and processing
speed of the computer.
13
Publicité
Chapitres
Table des Matières
