Yamaha WaveRunner GP1200R Manuel D'entretien page 332

– +
ELEC
IGNITION SYSTEM
IGNITION COIL
1. Measure:
Primary coil resistance
Out of specification → Replace.
Primary coil resistance:
Black/white (B/W) – Body
0.26 ~ 0.36 Ω at 20 ˚C (68 ˚F)
NOTE:
When measuring a resistance of 10 Ω or
less with the digital tester, the correct mea-
surement cannot be obtained because of
the tester's internal resistance.
Refer to "Low resistance measurement".
2. Measure:
Secondary coil resistance
Out of specification → Replace.
Secondary coil resistance:
Black/white (B/W) – Spark plug
lead terminal
3.5 ~ 4.7 kΩ at 20 ˚C (68 ˚F)
ENGINE STOP SWITCH
1. Check:
Engine stop switch continuity
Out of specification → Replace.
Engine stop switch continuity
(black coupler)
Lock plate Position
Installed
Removed
7-15
Lead color
White
Free
Push
Free
Push
E
Black