SilverCrest SSOT 6 B2 Mode D'emploi page 79

when the "MEM / SET" button
device has 9 storage spaces (see section on "Functions /
error analysis - the memory function").
Measuring the body temperature
(forehead mode)
IMPORTANT! It is advisable to carry out 3 meas-
urements in a row at the same place and to take the
highest temperature as the measured value.
With diff erent room temperatures, let the appliance
lie in the room where the temperature is to be taken
for at least 30 minutes to "acclimatise" it.
Before measuring your body temperature, you should
relax for about 5 minutes.
If you have done any physical activity or taken a
bath, wait for at least 30 minutes before taking a
measurement in order to get a measurement that is
as accurate as possible.
Ensure that the forehead or temple is clean, free of
injuries and not covered with sweat, cosmetics or
ointment.
Take a note of what measurement method you used to
measure the temperature and inform your doctor of it.
1. If the sleep mode has been activated, activate the
thermometer again by pressing any button before
taking the measurement.
2. Carefully press on the protective cap
with a gentle rotary motion and without using any force.
Operation
is pressed again. The
9
and remove it
8
GB 79