Publicité
Les langues disponibles
Les langues disponibles
3. Connect the wires to the player.
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic i nger pad to open the connection
terminal. Insert the wire and release the
i nger pad.
CAUTION
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplii er other than the one supplied with this
system. Connection to any other amplii er may
result in malfunction or i re.
Coloured (+)
Securing your front and surround
speakers
Secure each of the front and surround speakers
using the plastic catch provided. Screw two
supporting hooks into the wall behind the
speaker. Pass a thick cord around the hooks
and through the plastic catch so that the
speaker is stabilized (make sure to test that
it supports the weight of the speaker). After
installing, make sure the speaker is securely
i xed.
Plastic catch
CAUTION
• The plastic catch is not a mounting i xture, and
the speaker should not be hung directly from
the wall using this catch. Always use a cord
when stabilizing the speaker.
• Pioneer disclaims all responsibility for any
losses or damage resulting from improper
assembly, installation, insui cient strength of the
installation materials, misuse, or natural disasters.
• When placing this unit, ensure that it is i rmly
secured and avoid areas where it may be likely
to fall and cause injury in the event of a natural
disaster (such as an earthquake).
Installation
thick cord
17
3
Publicité
