Publicité
Les langues disponibles
Les langues disponibles
Method of operation
1.
Only use the tool in good light and visibility. During
the winter season beware of slippery or wet areas,
ice and snow (risk of slipping). Always ensure a
safe footing.
2.
Take care against injury to feet and hands from the
nylon cutting head.
3.
Never cut above waist height.
4.
Never stand on a ladder and run the tool.
5.
Never climb up into trees to perform cutting
operation with the tool.
6.
Never work on unstable surfaces.
7.
Remove sand, stones, nails etc. found within the
working range. Foreign particles may damage the
nylon cutting head.
8.
Should the nylon cutting head hit stones or other
hard objects, immediately switch off the motor and
inspect the nylon cutting head.
9.
Before commencing cutting, the nylon cutting
head must have reached full working speed.
10. During operation always hold the tool with both
hands. Never hold the tool with one hand during
use. Always ensure a safe footing.
11.
The nylon cutting head has to be equipped with
the guard. Never run the tool with damaged
guards or without guards in place!
12. All protective equipment such as guards supplied
with the string trimmer must be used during
operation.
13. Except in case of emergency, never drop or cast
the tool to the ground or this may severely damage
the tool.
14. Never drag the tool on the ground when moving
from place to place, the tool may become
damaged if moved in this manner.
15. Always remove the battery cartridge from the tool:
−
whenever leaving the tool unattended;
−
before clearing a blockage;
−
before checking, cleaning or working on the
tool;
−
whenever the tool starts vibrating abnormally;
−
whenever transporting the tool.
16. Always ensure that the ventilation openings are
kept clear of debris.
Maintenance instructions
1.
The condition of the nylon cutting head, protective
devices must be checked before commencing
work.
2.
Turn off the motor and remove the battery
cartridge
before
replacing the nylon cutting head or nylon cord and
cleaning the tool.
3.
Check for loose fasteners and damaged parts
such as cracks in the nylon cutting head.
carrying
out
maintenance,
4.
Follow instructions for lubricating and changing
accessories if applicable.
5.
When not in use store the equipment in a dry
location that is locked up or out of children's reach.
6.
Use only the manufacturer's recommended
replacement parts and accessories.
7.
Inspect and maintain the tool regularly, especially
before/after use. Have the tool repaired only by
our authorized service center.
8.
Keep handles dry, clean and free from oil and
grease.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
WARNING:
Use of this product can create dust containing chemicals
which may cause respiratory or other illnesses.
Some examples of these chemicals are compounds
found
in
pesticides,
herbicides.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out
microscopic particles.
Symbols
The followings show the symbols used for tool.
･
volts
･
direct current
･
no load speed
･
revolutions or reciprocation per minute
4
insecticides,
fertilizers
USG001-2
and
USD301-1
Publicité
