Télécharger Imprimer la page

Ayce DF-HT5390P Mode D'emploi page 27

Publicité

Les langues disponibles

Les langues disponibles

Ensure the appliance is switched off before connecting to the
mains power supply.
To disconnect the appliance, switch it "OFF", and then remove
the plug from outlet. Do not pull the cord to disconnect the plug.
Switch off the power supply and disconnect from mains supply
when not in use, before cleaning or other maintenance.
Do not operate in areas where gasoline, paint or other
flammable liquids are used or stored.
Indoor use only.
To prevent a possible fire, do not block air intakes or exhaust in
any manner.
Don't touch the hot surfaces.
Do not use pesticide or other flammable spray around the
product. Because it will damage the device and cause fire.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening, as this may cause an electric shock, fire or
damage to the appliance.
Always ensure that hands are dry before operating or adjusting
any switch on the product or touching the plug and socket-outlet.
Do not leave this appliance unattended when it's in use.
The most common cause of overheating is deposits of dust or
fluff in the appliance. Ensure these deposits are removed
regularly by disconnect the appliance and vacuum cleaning air
vents and grilles.
Do not place the heater on carpet, don't place the cable under
carpets. Arrange cord away from traffic areas so that it will not
be tripped over.
TECHNICAL SPECIFICATIONS
Model
Power
Rated Voltage
Protective Class
Remote Control
DF-HT5390P
2000W
220-240V~50/60Hz
Class II
Yes
PRODUCT DESCRIPTION
1
Front Cover
2
Wind outlet
3
Fireplace display window
4
Swing holder
5
Base
52 | 53
01
09
02
03
08
04
05
06
07
6
Power cord
7
Control panel
8
Power switch
9
Remote control
GB

Publicité

loading