Care And Cleaning; Troubleshooting - AEG FAVORIT 57202W0 Notice D'utilisation

9. CARE AND CLEANING

WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains sock-
et.
9.1 Cleaning the filters
9.2 Cleaning the spray arm
9.3 External cleaning
Clean the appliance with a moist soft
cloth.

10. TROUBLESHOOTING

The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solu-
tion to the problem.
A
B
Dirty filters and clogged spray
arm decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
1. Turn the filter (A) counter-
clockwise and remove it.
2. Remove the filter (B).
3. Wash the filters with water.
4. Before you put the filter (B)
back, make sure that there
are no residues of food or soil
in or around the edge of the
sump.
5. Put the filter (A) into position
in filter (B). Turn it clockwise
until it locks.
An incorrect position of
the filters can cause bad
washing results and dam-
age to the appliance.
1. Turn the nut counterclockwise.
2. Remove the spray arm.
3. Clean the holes.
If the holes in the spray arm are clogged,
remove remaining parts of soil with a
thin pointed object.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning
pads or solvents.
With some problems, the display
shows an alarm code:
•
- The appliance does not fill with
water.
ENGLISH
27