Camera; Osd; Image; Ptz - Abus TVHD80000 Manuel Utilisateur

Camera

Camera

OSD

Camera
Camera to be set
Allocation of camera name
Camera Name
Activate / deactivate display of
Display Name
camera name in the live view
Activate / deactivate display of
Display Date
date in the live view
Activate / deactivate display of
Display Week
week in the live view
Selection of date display type
Date Format
Time Format
12 hours / 24 hours
Settings relating to the presenta-
Display Mode
tion of camera name and date
Changing the font size
OSD font

Image

Select the camera channel to be processed at "Camera".
Adapt the camera image to light conditions at "Mode" by
means of specified settings or with user-defined settings.

PTZ

Currently no functioning.

Setting up of zones

Note
When carrying out camera surveillance, you can
define zones that should not be monitored (private
zones).
You can also set up zones with special character-
istics (e.g. tamper monitoring or motion detection).
1. Activate the zone by ticking the corresponding box
"Enable motion detection".
2. With the left mouse button held down, pull a frame
around the desired zone in the Miniature screen.
3. At sabotage monitoring and motion recognition, you
can set the sensitivity on the right of the miniature
image, and at motion recognition you can switch on
full image recognition.
4. Confirm the settings by clicking Apply and leave the
menu with Back.
Note
After applying the settings, the set private zone is
displayed as a black rectangle in the image.
Zones for tamper monitoring and motion detection
are not displayed.
Note
In order to record using the motion recognition, you
must set the time plan at Record (see p. 34).
100