Abus TVHD80000 Manuel Utilisateur page 107

(Default: 21)
User Name Enter the log-in name
Password Enter the log-in password
Directory Select the storage location:
Use Root Directory
Use Parent Directory
Use Secondary Directory
Parent Directory Activates input for "Parent Directory".
The files are saved in a folder named
here.
Secondary Direc- Activates input for "Parent Directory"
tory and "Secondary Directory".
The files are saved in the folders pre-
viously named.
Confirm the settings by clicking Apply and leave the
menu with Back.
SNMP
Parameter Setting
Enable SNMP Activate the checkbox to create a
connection to SNMP software
SNMP Version Version of the SNMP system
SNMP Port Enter the SNMP port
(Default: 161)
Read Community Enter the "Key" according to the set-
tings of your SNMP software.
Write Community Enter the "Key" according to the set-
tings of your SNMP software.
Trap Adresse Enter the IP address of the
SNMP manager
Trap Port Enter the trap port
(Default: 162)
107
Note
SNMP is used for monitoring the device status.
For this you need SNMP software not available
from ABUS.
Confirm the settings by clicking Apply and leave the
menu with Back.
More settings
Parameter Setting
Alarm Host IP Network address of the PC where the
CMS is installed
Alarm Host Port Port of your CMS Station
Server Port Port for data communication (Gen-
eral: 8000)
HTTP Port Port for web server (General: 80)
Multicast IP In order to minimize traffic you can
enter a Multicast IP. The IP address
has to match the IP address of the
PC running the CMS software.
RTSP Service RTSP-port
Port (Default: 554)
Note
Server port 8000 and HTTP port 80 are the stan-
dard ports for remote clients and remote Internet
browser access.
Note
With Alarm Host IP/Port you configure the address
of your CMS software. The CMS software is noti-
fied when there is an alarm, and performs various
reactions depending on the setting.
Configuration